The Green
Door Company
ABOUT US
As a known industry leader, we’re used to working with all types of customers - local or global, large or small. Exceptional quality is the foundation of our company, and is the driving force behind all decisions; whether it’s which materials to purchase or the best way to serve our customers.
We work in a highly competitive field, so we’re constantly investing in technology and research to make sure we stay ahead of the curve. Our commitment to quality guarantees our success and your satisfaction.
TECHNICAL INFORMATION
All timber used in our manufacturing process are kiln dried to a moisture content of 12 % or below and originates exclusively from sustainable forests.
There are 3 classifications of doors available:
FULL EXTERIOR DOORS
Our full exterior door range are manufactured with solid hardwood and are designed to withstand the African weather conditions if treated correctly. The glue used in the manufacturing process has a D4 classification, meaning the glue is water proof.
SEMI EXTERIOR DOORS
The doors in this range are engineered using mixed timber including pine and are not suited for full exterior applications. They are the perfect fit if covered by an awning, roof or any other similar structure. They should not be exposed to direct weather (Sunlight and Rain)
The Okoume Veneer on the rails and stiles are 1.5mm thick. The Veneer on the panels has a thickness of 0.55mm.
The Decorative Panels on the Craft Range are made from the highest quality resin and Fibre Glass, and after the manufacturing process is UV stable. All glue used in the manufacturing and assembly process has a minimum of a D3 classification, meaning that the glue used, is water resistant.
INTERIOR DOORS
All doors in this range are designed for interior use only and should not be used for exterior applications.
TREATMENT AND HANDLING
FULL EXTERIOR AND SEMI EXTERIOR DOORS
-
The Product should be sealed immediately after purchase with at least 3 coats of a quality exterior sealant to avoid a loss, or gain in moisture (Moving into equilibrium) depending on local conditions.
-
If not sealed properly on all six surfaces (4 Edges and 2 Flat surfaces) Shrinking and or warping may occur as a result of the timber moving into equilibrium. If any cutting is done to the product at installation it must be re-sealed again on those surfaces.
-
This product must be sealed every six months to ensure maximum longevity of the product.
-
Joinery should be stored in a cool dry area and should be stored flat on dunnages (At least three) spaced equally apart.
-
Do not install this product while plaster/screeting etc. is still wet. Installation should take place as close to occupation of property as possible.
INTERIOR DOORS
-
Do not trim more than 10mm per edge off of the product.
-
The location of the lock block is clearly stamped on the side of the door, install lock on the marked side of the door only.
-
Joinery should be stored in a cool dry area and should be stored flat on dunnages (at least three) spaced equally apart.
-
Do not install this product while plaster/screeting etc. is still wet. Installation should take place as close to occupation of property as possible.
IMPORTANT NOTES
While every care is taken to ensure the quality of the product is of the highest standard it is very important to inspect the product PRIOR to installation, i.e. lock mechanism (Locking and Unlocking), keys and overall appearance etc.
Ensure that a qualified carpenter/builder perform the installation.
Pivot Doors are pre hung in frames at the factory and include lock, handle and hinge mechanisms. Pivot doors also come with installation, care and maintenance instructions.